Made in the UK

  1. Home
  2. Products
  3. Drum Lifting Equipment
  4. Corner Drum Lifting Trolley

Corner Drum Lifting Trolley

DTP05-R500

Our Corner Drum Lifting Trolley has a smaller footprint than the Side-Shift Drum Lifting Trolley and is lighter than our Counterbalance Drum Lifting Trolley, and with a width of 1180mm it can access most work areas. The universal drum catch lets you connect the unit to a wide variety of drums. As with all our equipment, we build this unit using the finest materials.

Watch training video
An operator using an STS Corner Drum Depalletiser to lift drums and barrels off of a pallet An operator uses an STS drum lift depalletiser for manual handling a range of drums A birds eye view of an STS corner drum depalletiser with a range of drums An operator using the STS Corner Drum Depalletiser to place barrels onto the floor Operator handles a 220 litre steel drum with the corner drum lifter

DTP05-R500

Our Corner Drum Lifting Trolley has a smaller footprint than the Side-Shift Drum Lifting Trolley and is lighter than our Counterbalance Drum Lifting Trolley, and with a width of 1180mm it can access most work areas. The universal drum catch lets you connect the unit to a wide variety of drums. As with all our equipment, we build this unit using the finest materials.

Watch training video

Key product features

Universal drum catch

The universal catch on the drum lift, attached to varying types of drum

Universal drum catch

We use this precision gripper on a variety of our products. Laser-cut from stainless steel in our UK manufacturing facility, the adjustable drum catch can connect to drums of different types, sizes and materials. For a breakdown of the drums that are compatible with this product, view the drum suitability document below.

View drum suitability

Stainless-steel ladder rack

The stainless steel ladder rack on the corner drum depalletiser, accommodating drums of different heights

Stainless-steel ladder rack

Our stainless-steel ladder rack allows you to adjust the position of the drum catch to accommodate drums of different heights. Just move the catch lower for shorter drums and higher for taller drums. For a detailed breakdown of the drum heights that are compatible with this product, please see the specification below.

Manual hydraulic pump

The side view of the manual hydraulic pump on the STS corner depalletiser

Manual hydraulic pump

The aluminium pump supplies oil to a ram, this system lifts drums when the handle is pumped. A hand-operated lever provides precise control when a drum needs to be lowered to the ground or onto a pallet. We assemble our hydraulics by hand in our UK factory to ensure that each system is both clean and reliable.

Chemical-resistant wheels

The base and wheels of the STS Corner Drum Depalletiser

Chemical-resistant wheels

We source high-quality elasticated rubber wheels to ensure this product performs in all conditions. We also use precision bearings, which offer dependable wheel performance in harsh environments. To get the most out of this unit we recommend you use it on smooth surfaces.

Drum suitability

Varying sizes of drums that can be accommodated by the STS corner depalletiser

Drum suitability

The DTP05 Corner Drum Lifting Trolley can handle a wide variety of drum types and sizes – especially useful if you handle different types of drums on a daily basis. For a detailed breakdown of the drums with which this product is compatible, please see the drum suitability document below. If the drums you use aren’t in the document, contact us and we can offer advice and guidance.

View drum suitability

ATEX / UKEX-certified for Zone 1, 2, 21 and 22 (optional)

ATEX and UKEX Corner Depalletser with MAUSER drum lifted to full height, ATEX chains visible

ATEX / UKEX-certified for Zone 1, 2, 21 and 22 (optional)

We can provide a fully-certified ATEX / UKEX drum lifting trolley for use in hazardous areas


The DTP05-Ex Corner Drum Lifting Trolley is designed and manufactured for use in gas and dust classified spaces: Zone 1, 2, 21 and 22. The drum lifter is constructed to ensure electrical continuity whereby a path to ground is always present. A Declaration of Conformity is supplied stating compliance the directives and relevant British and ISO Standards.

Specification

DTP05-R500 Corner Drum Lifting Trolley

  • Safe working load (SWL)

    350kg

  • Leg design

    Straddle legs, maximum width 1190mm

  • Pallet approach

    Designed for lifting from the corner of a pallet

  • Drum compatibility

    Steel, plastic and fibreboard drums, 50-220 litres (incl. MAUSER drums)

  • Drum gripping catch

    Adjustable catch for different drum lips, catch is also height adjustable

  • Lift stroke

    500mm 

  • Under-drum clearance

    420mm

  • Lifting system

    Hydraulic 17cc hand-operated pump with lowering valve

  • Guarding

    Shatterproof clear polycarbonate

  • Metal preparation

    Grit blasted mild steel, aqua blasted stainless steel parts

  • Surface finish

    Primer and polyester powder coated mild steel, stainless steel is smooth and clean

  • Unit colour

    RAL 5010 (blue)

  • Front wheel type

    Fixed 160mm, precision bearings

  • Front wheel material

    Nylon centred, elasticated rubber tyres

  • Rear wheel type

    Braked castors 100mm, precision bearings

  • Rear wheel material

    Aluminium centred, polyurethane tyres

  • Compliance

    EC Machinery Directive 2006/42/EC

DTP05-R500-Ex ATEX Corner Drum Lifting Trolley

  • Safe working load (SWL)

    350kg

  • Leg design

    Straddle legs, maximum width 1190mm

  • Pallet approach

    Designed for lifting from the corner of a pallet

  • Drum compatibility

    Steel, plastic and fibreboard drums, 50-220 litres (incl. MAUSER drums)

  • Drum gripping catch

    Adjustable catch for different drum lips, catch is also height adjustable

  • Lift stroke

    500mm 

  • Under-drum clearance

    420mm

  • Lifting system

    Hydraulic 17cc hand-operated pump with lowering valve

  • Guarding

    Anti-static shatterproof clear polycarbonate

  • Metal preparation

    Grit blasted mild steel, aqua blasted stainless steel parts

  • Surface finish

    Primer and polyester powder coated mild steel, stainless steel is smooth and clean

  • Unit colour

    RAL 5010 (blue)

  • Front wheel type

    Fixed 160mm, precision bearings

  • Front wheel material

    Aluminium centred, electrically conductive elastic solid rubber tyres

  • Rear wheel type

    Braked castors 100mm, precision bearings

  • Rear wheel material

    Aluminium centred, electrically conductive elastic solid rubber tyres

  • Compliance

    EC Machinery Directive 2006/42/EC

    ATEX Directive 2014/34/EU

    Zones 1, 2, 21 and 22 CE Ex II 2 G D

Optional features

ATEX / UKEX option

We can offer an ATEX / UKEX version of this model, suitable for use in zone 1, 2, 21 and 22 environments.

Stainless-steel model

We offer a variety of stainless finishes suitable for clean rooms as well as good manufacturing practice (GMP) areas.

Electric Lift

We can offer this lifter with push-button electric-hydraulic lift to make light work of lifting heavy drums.

Sale or return

In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.

Corner Drum Lifter (DTP05-R500)
Play Video

Technical specification

See the full technical specification for our Corner Drum Lifting Trolley for details such as weight, dimensions and load capacity.

Instruction manual

View the instruction manual for our Corner Drum Lifting Trolley, which details how to safely operate and maintain the unit.

Contact Us

Do you have a manual handling issue we could solve? We’d be happy to discuss any handling concerns and advise on the most suitable STS equipment. You can talk to us via telephone, email and social media.

FAQs

Do you have a question for us? Take a look at our FAQ page for answers to common customer queries.