STE05-DCR06 - Electric Power Drive Drum Rotator

We designed this rotator to load the drums into a dispensing cabinet. It allowed loading of the drums into the cabinet in a quick and safe manner.

How the unit works

The drums arrive into the department on pallets. The operators use an STS Lever Bar to separate the drums on the pallet. This gives the operators enough space to use the de-heading device. The drum will be slightly off the edge of the pallet. The STS Power Drive Drum Rotator will then be driven into the drum. The bottom catch is lined up with the bottom of the drum and the top clamp is powered down to clamp the drum. The drum is then lifted off the pallet and the unit is then driven to the cabinet. The drum is lifted and power rotated forwards 90 degrees so the drum can be placed on the rails. The clamp is then released by pressing a button on the back panel. The operator can operate all the controls from the back of the unit.

Technical Specifications

  • 1500mm battery hydraulic lift
  • 1998mm fixed mast height
  • Steel construction
  • Grit blasted and powder coated finish
  • High quality mast and combined carriage bearings
  • Polycarbonate shatterproof clear guarding
  • Silicone booted lift and lower buttons
  • Power clamp system with stainless steel arms
  • 90 Degree power rotation
  • Electric power drive
  • Emergency stop switch
  • Digital battery condition meter
  • Low maintenance battery charger
  • Straddle leg configuration
  • Digital battery condition meter
  • Built in automatic battery charger 15 amp per hour
  • Digital battery condition meter