STP01-DRC01 - Side Tipping Rotator EX-Rated

This special drum decanting unit was designed especially for sites where there is a need to decant large numbers of drums into vessels.

The unit is positioned next to the vessel to be loaded. The drum to be decanted is taken from a pallet using the DTP04 Side-Shift De-Palletiser and loaded into the tipping cradle. Once loaded it is easy to orientate the aperture of the drum using the inbuilt rotation system in the base of the cradle. This ensures that the aperture is in the correct position for decanting into the vessel and a side clamp holds the drum secure when inverted. The operator can then lift and tip the drum safely using the two control levers at the back of the unit. Whilst the drum is decanting the operator can prepare the next drum using the Side-Shift De-Palletiser.

The STP01-DRC01 is very narrow at only 650mm wide so enables easy access to vessels. The unit offers a 110 degrees of tip angle at a maximum height of 1500 mm with a SWL of 350 kg. Air consumption for the unit is minimal at 6 cfm (180 L/min.)

The drum to be decanted is taken from a pallet using the DTP04 Side-Shift De-Palletiser and loaded into the STP01-DCR01.

Technical Specifications

  • Pneumatic hydraulic lift and tip
  • ATEX certified for Zone 1 areas
  • Narrow format for limited access
  • Suits multiple tipping operations
  • Inbuilt drum orientation system
  • Option on battery hydraulics
  • Stainless Steel options available

Similar Products

Stainless Option
Narrow Fixed Band Option
Fixed Band Option
Fixed Band Option
Battery Powered Option
Battery Powered Option