STE05-RRH01 - Electric Power Drive Roll Rotator

This roll rotator was designed for handling rolls, reels and drums from 350-600mm in diameter. The unit can lift rolls off pallets and rotate and transport them around.

All of the functions of the roll rotator are powered allowing lots of rolls to be handled safely each day by a single operator.

How the unit works
  • The operator drives the unit to the roll until the clamping pads line up with the side of the roll.
  • The clamp is then closed by pressing a button on the handheld controller. The clamp uses a hydraulic ram to pull the clamping pads to the roll.
  • The roll is then lifted off the pallet by pressing another button.
  • The operator can then drive away to the next location.
  • The roll can then be rotated into a horizontal position by turning a control knob on the handheld controller.
  • The roll is then lowered to the floor and the clamp opened.

Technical Specifications

  • 1400mm battery hydraulic lift
  • 1998mm fixed mast height
  • Battery electric lift
  • SWL 350 kg
  • Fixed forks
  • Electric power drive. AC/DC intelligent drive motor
  • Programmable control box. Auto reversing tiller control
  • 2 x 180 amp Low maintenance batteries
  • High quality mast and combined carriage bearings
  • Polycarbonate shatterproof clear guarding
  • Silicone booted lift and lower buttons
  • Power clamping head
  • Hydraulic clamp pressure meter
  • Electric power rotation
  • Handheld controller
  • Emergency stop switch
  • Automatic battery charger
  • Digital battery condition meter
  • Straddle leg configuration
  • Steel construction. Grit blasted and double powder coated
  • 160mm diameter front wheels with precision bearings