STE01-RSA01 - Core Roll Lifter

This core roll lifter was based on the design of a standard stacker lift unit with a fixed roll spike. This will pick a roll up by the spike going through the core of the roll. This unit has battery hydraulic lift and manual push.

The roll lifter is able to remove all of the rolls from a pallet without having to move the pallet. The roll spike will be 1200mm long. We fitted a flange onto the spike 320mm from the end, preventing the operators from picking up more than one roll at a time. The unit had to be heavy duty to support a roll that weighs 375 kg at 1200mm long.

The customer also needed to place the roll on the floor once it had been removed from the pallet, so the legs of the unit need to go down the outside of the pallet due to the diameter of the roll. If we made the legs of the unit go under the pallet we would not be able to place the roll on the floor because it would sit on the stacker’s legs.

We can offer the unit with battery hydraulic lift or with a manual hydraulic pump unit.

Technical Specifications

  • 600mm battery hydraulic lift
  • 1100mm fixed mast height
  • High quality mast and combined carriage bearings
  • Polycarbonate shatterproof clear guarding
  • Silicone booted lift and lower buttons
  • Straddle leg configuration to suit 800mm euro pallets
  • Steel construction. Grit blasted and double powder coated
  • 160mm diameter wheels with precision bearings
  • Rear swivel braked castors to aid manoeuvring in tight spaces
  • Digital battery condition meter
  • Automatic battery charger
  • Stainless steel roll spike 1200mm long with depth flange at 320mm
  • Bead blasted clean finish
  • Manual double rotational gearbox arrangement