To operate the unit simply plug in an airline to enable the powered functions; the buttons on the rear panel are used to lift, lower and tilt the load. The unit makes use of mandatory safety features such as an emergency stop button and hydraulic blocking valves that add extra security to the lift system. If the airline is disconnected for any reason, the forks will remain locked in place and the load will remain safe and secure.
Key product features
Fully compliant lift system
Fully compliant lift system
ATEX / UKEX-certified for gas and dust zones 1, 2, 21 and 22
ATEX / UKEX-certified for gas and dust zones 1, 2, 21 and 22
This pneumatic-hydraulic stacker is ATEX / UKEX certified for use in Zone 1, 2, 21 and 22 environments. Each of our 'Ex' rated stacker trucks is designed to ensure electrical continuity, a path to ground is always present. With each ATEX / UKEX model, we supply a manufacturer’s Declaration of Conformity which states compliance with the directives and relevant British and ISO Standards.
Tilting stainless steel clad forks
Tilting stainless steel clad forks
This product was developed due to demand from manufacturers who needed to fully empty their process vessels to avoid wastage and as well as dangerous manual handling practices. When a vessel is 90% empty, the 10% remaining inside is very difficult to remove. Using this machine, the final 10% of the material can be removed through the drain port saving both time and money.
To reduce the risk of spark generation we fit our ATEX / UKEX stacker trucks with stainless steel clad forks; should the forks contact the ground the chance of a spark is drastically reduced. Manufactured in the UK, the stainless cladding is of an extremely high standard and is very strong and robust.
Hot-rolled lifting channels
Hot-rolled lifting channels
To keep operators safe and the unit stable, we use hot-rolled steel channels in the manufacture of our stacker trucks. These channels provide a sturdy basis for your pallet lifting operations and ensure minimal deflection of the chassis when loaded.
Ackermann-style rear-wheel steering provides maximum directional control when tipping drums into your process. Wheels are made of heavy-duty nylon which is very hard, reducing rolling resistance considerably. Park brakes are fitted to all models for static positioning and safety. We can provide you with custom leg configurations should you need them including wider legs or narrower legs.
Specification
STP07-FAC02-Ex ATEX / UKEX Stacker Truck, Tilting Forks
-
Safe working load (SWL)
1000kg
-
Functions
Powered lift/lower & tilt, manual push/pull
-
Power details
Air powered - requires min: 400L/min, optimum: 760L/min at 6 bar with 13mm flexible air hose
-
Controls
Silicone booted buttons, emergency stop button
-
Lift height
1480mm (top of forks)
-
Fork specification
Stainless steel cladded 1200mm long forks with adjustable width
-
Tilt angle
Forks tilt 16.5° from the horizontal
-
Construction
Mild steel construction
-
Metal preparation and surface finish
Grit blasted mild steel, primer and polyester powder coated
-
Powder coat colour
RAL 5010 (blue)
-
Guarding
Anti-static shatterproof polycarbonate guarding
-
Leg dimensions
Inside straddle width 1250mm, total outside width 1480mm
-
Front wheels
Two fixed 150mm nylon wheels with ATEX features
-
Rear wheels
Two tiller steered 160mm nylon wheels with ATEX features
-
Noise
Less than 76 dBA
-
Compliance
CE / UKCA
ATEX / UKEX (zones 1, 2, 21, 22)
Optional features
Electric-hydraulic lift
For safe area applications we adapt an STP07 (pneumatic unit) into an STE07 (electric unit). On-board batteries then power the hydraulic lift function.
Power-drive system
When moving goods over long distances we suggest adding power drive. Our power-drive tiller steering offers effortless control, with battery and pneumatic options.
Load cell weighing system
We can provide these units with an ATEX / UKEX weigh scale system. Measure accurately the weight of vessels and IBCs using this model.
Variable leg dimensions
When machinery integration is critical we will modify leg dimensions to suit your facility.Sale or return
In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.
Contact Us
If you need a custom manual handling solution, we can design and manufacture the right piece of equipment to meet your specific requirements. Talk to us to find out how we can help you.
ATEX Pedestrian Stacker Trucks
Whatever your industry or application, we can design and manufacture pedestrian stacker trucks customised to suit your requirements.