Made in the UK
  1. Home
  2. Products
  3. Drum Tippers and Rotators
  4. Power Drive Power Clamp Drum Tipper

Power Drive Power Clamp Drum Tipper

STE05 / STP05-RRH01-Ex

Our fully powered drum tipper with power clamp is popular with companies that want to increase efficiency and eliminate manual handling risks. We can supply the unit with two powered options: electric hydraulic which utilises on-board batteries, or a pneumatic-hydraulic model which can be certified for ATEX areas. A power clamp head assembly with flexible bands is fitted to the unit which can handle drums and barrels from 50 to 220 litres.​

Watch training video

STE05 / STP05-RRH01-Ex

Our fully powered drum tipper with power clamp is popular with companies that want to increase efficiency and eliminate manual handling risks. We can supply the unit with two powered options: electric hydraulic which utilises on-board batteries, or a pneumatic-hydraulic model which can be certified for ATEX areas. A power clamp head assembly with flexible bands is fitted to the unit which can handle drums and barrels from 50 to 220 litres.​

Watch training video

Key product features

Power Drive

Power Drive

We design, build and test all our power drive drum tippers in our UK manufacturing facility. Sourcing the highest quality parts makes certain that all our units require a minimum amount of maintenance.


Electric

Suitable for safe areas, this fully-powered drum tipper comprises an onboard battery bank along with two separate electric motors. When the unit is not in use, simply connect the mains power to the charger to ensure the unit remains in a fully-charged state at all times.


Pneumatic

Our pneumatic units can be certified for use in ATEX and UKEX areas. Operators connect an airline to power a pneumatic-hydraulic circuit which powers the lift, clamp, rotation and drive of the unit. Precise drive control during manoeuvring can be achieved through control hoses located inside the steering tiller.

Rear tiller and control panel

Rear tiller and control panel

The power drive system on this unit is powered via the rear of the unit using a steerable tiller. The speed of the drive is adjusted using throttles and an anti-trap switch ensures the operator is kept safe during use. The rear panel features a pressure gauge and an emergency stop button for operators to cut off the unit's power if required.

Powered drum clamp and forward rotation

Powered drum clamp and forward rotation

Our powered drum clamping feature offers efficiency improvements for those looking to speed up production operations. Simply approach a drum on the floor (or the corner of a pallet) and clamp the pads around the drum. Once the drum is secure, the unit can then lift and tip the contents into the appropriate vessel. Rotation can be controlled via the rear panel offering complete control during tipping.

Clamping pad design

Clamping pad design

The flexible pads adapt to the contours of the drums and are able to accommodate a wide range of drum diameters from 280mm to 610mm. The power-clamp pads can be configured to allow drums to be removed from the corner of a pallet. Each gripping head can be tailored to suit your specific lifting application. When handling only 200- to 220-litre drums flexible pads are not required, in this instance, we can supply fixed radius pads with a rubber lining.

Drum rotator suitability

Drum rotator suitability

Designed to be as versatile as possible, this power-clamp model can handle a wide range of drum types and sizes. The clamping pads can be provided for handling drums and barrels with a diameter range of between 280mm and 610mm. The system has been designed to handle drums of up to 1000mm in height; this covers the majority of drum types used in the market.

View drum suitability

ATEX / UKEX-certified for gas and dust zones 1, 2, 21 and 22 (optional)

ATEX / UKEX-certified for gas and dust zones 1, 2, 21 and 22 (optional)

As experts in the field, we have assisted a variety of manufacturing sectors with their hazardous drum-handling processes. Our power-drive pneumatic-hydraulic drum rotators can be supplied ATEX and UKEX compliant, suitable for use in Zone 1, 2, 21 and 22 environments.


Equipment is designed to ensure electrical continuity and that there is always a path to ground. All of our ATEX / UKEX drum handling equipment is supplied with a Declaration of Conformity which states compliance with the directives and relevant British and ISO Standards.

Specification

STE05-RRH01 Electric Power Drive Power Clamp Drum Tipper

  • Safe working load (SWL)

    300kg

  • Functions

    Powered lift, clamp, rotation and drive

  • Power details

    Two, on-board 142Ah batteries powering an electric-hydraulic pump and electric drive motor, mains 230v, smart battery charger built into control box

  • Controls

    Silicone booted buttons, emergency stop, removable key switch, digital battery condition meter

  • Lift height

    1500mm 

  • Tipping clearance

    1500mm at 15° tip angle / 1400mm at 30° tip angle (205 litre drum) 

  • Drum compatibility

    Steel and plastic drums, 50-220 litres (incl. MAUSER drums)

  • Clamping system

    Two hydraulic clamping arms grip the outside of the drum, the system uses a constant-tension system to keep drum safe and secure

  • Rotation via gearbox

    Rotation via powered gearbox assembly, fully invert drums to 180° to empty the contents

  • Construction

    Mild steel construction

  • Metal preparation

    Grit blasted mild steel, aqua blasted and vibro-polished stainless steel parts

  • Surface finish

    Primer and polyester powder coated mild steel, stainless steel is smooth and clean 

  • Powder coat colour

    RAL 5010 (blue)

  • Guarding

    Polycarbonate shatterproof clear guarding

  • Leg dimensions

    Inside straddle width 850mm, total outside width 1080mm

  • Front wheels

    Two fixed 160mm wheels, aluminium centred with polyurethane tyres and precision bearings

  • Noise

    Less than 76 dBA

  • Compliance

    CE / UKCA

STP05-RRH01-Ex ATEX/ UKATEX Pneumatic Power Drive Power Clamp Drum Tipper

  • Safe working load (SWL)

    300kg

  • Functions

    Power lift/lower, power clamp, power rotation, manual push/pull

  • Controls

    Silicone booted control buttons and emergency stop

  • Lift height

    1500mm

  • Tipping clearance

    1470mm at 15° tip angle / 1400mm at 30° tip angle (205 litre drum)

  • Drum compatibility

    Steel, plastic and fibreboard drums, 50-220 litres (incl. MAUSER drums) (Note: L-ring plastic drums require a separate INS02 attachment)

  • Clamping head

    Hydraulic constant-tension clamping head with pressure gauge for handling all drum types - ‘hands off’ drum handling solution

  • Powered Rotation

    Rotation via powered gearbox assembly, fully invert drums to 180° to empty the contents

  • Construction

    Mild steel construction with stainless steel clamp pads

  • Metal preparation

    Grit blasted mild steel, aqua blasted and vibro-polished stainless steel parts

  • Surface finish

    Primer and polyester powder coated mild steel, stainless steel is smooth and clean 

  • Powder coat colour

    RAL 5010 (blue)

  • Guarding

    Anti-static polycarbonate shatterproof clear guarding

  • Leg dimensions

    Inside straddle width 850mm, total outside width 1080mm

  • Front wheels

    Two fixed 160mm wheels, aluminium centred with electrically conductive polyurethane tyres and precision bearings

  • Rear wheels

    Two tiller steered 160mm wheels, aluminium centred with electrically conductive polyurethane tyres and precision bearings

  • Noise

    Less than 76 dBA

  • ‘Ex’ features

    Yes

  • Compliance

    CE / UKCA
    ATEX / UKEX (zones 1, 2, 21, 22)

Optional features

ATEX / UKEX option

We can offer an ATEX / UKEX version of this drum rotator model, suitable for use in zone 1, 2, 21 and 22 environments.

Stainless-steel model

We can offer a stainless steel drum rotator suitable for clean rooms as well as good manufacturing practice (GMP) areas.

Telescopic/variable lift height

Single- and dual-mast models are available. Single mast units offer up to 1500mm of lift whereas telescopic units offer 2700mm.

Variable leg dimensions

We can modify leg dimensions to suit your existing equipment and infrastructure.

Load-cell weighing system

With our load-cell system you can weigh drums while you handle them. A digital read-out provides real-time weight information ideal for batch production.

Sale or return

In the UK we can supply certain equipment on a sale-or-return basis, meaning you can use a unit on-site for seven days with no obligation to buy it once the trial period is up. Find out more here.

Power Drive Power Clamp Drum Tipper (STE05-RRH01)
Play Video

Technical specification

See the full technical specification for our Power Drive Power Clamp Drum Tipper for details such as weight, dimensions and load capacity.
view pdf

Instruction manual

View the instruction manual for our Power Drive Power Clamp Drum Tipper, which details how to safely operate and maintain the unit.
view pdf

Contact Us

Do you have a manual handling issue we could solve? We’d be happy to discuss any handling concerns and advise on the most suitable STS equipment. You can talk to us via telephone, email and social media.

Get in touch

Drum Rotators / Tippers

Tipping drums is an essential part of many industrial processes. Our drum rotators provide a safe way to lift and tip various drum types and sizes, and we can customise each rotator to suit your exact needs.

View our drum rotators